Leonardo · Pomezia, Italy

Job Description: Leonardo è un gruppo industriale internazionale, tra le principali realtà mondiali nell’Aerospazio, Difesa e Sicurezza che realizza capacità tecnologiche multidominio in ambito Elicotteri, Velivoli, Aerostrutture, Elettronica, Cyber Security e Spazio. Con oltre 60.000 dipendenti nel mondo, l’azienda ha una solida presenza industriale in Italia, Regno Unito, Polonia, Stati Uniti, e opera in 150 paesi anche attraverso aziende controllate, joint venture e partecipazioni. Protagonista dei principali programmi strategici a livello globale, è partner tecnologico e industriale di Governi, Amministrazioni della Difesa, Istituzioni e imprese. All’interno della Divisione Spazio , stiamo ricercando un/a AIT Engineer per il sito di Pomezia (RM). La persona si occuperà di Integrazione, allineamento e test di sottoassiemi opto-meccanici ed elementi attivi (cavità laser, camere di amplificazione a stato solido, cristalli non lineari) all’interno di sistemi Laser e Lidar per lo Spazio, e relativi test di qualifica dell’apparato integrato. Il lavoro principalmente si svolgerà all’interno di camere pulite con controllo e monitoraggio di temperatura, umidità e contaminazione (classe ISO-6 e ISO-5). Principali attività: Stesura di documentazione fasi di integrazione e test (procedure, report, as-built) Ideazione e Utilizzo di setup di misura e collaudo (GSE) di natura elettrica, termica, ottica e meccanica Attività di allineamento di elementi laser attivi all’interno di banchi ottici di un payload spaziale Attività di misurazione e caratterizzazione completa di fasci laser (profilo spaziale, caratteristiche temporali, spettrali e di stabilità nel tempo e in condizioni di qualifica ambientale). Esperienza nell’ambito delle facility per la qualifica di apparati spaziali: camere TV, Shaker, apparati di condizionamento termico, Unità di terra per comando controllo elettrico) Supporto a ispezioni della qualità interna e dei Clienti Supporto per le attività di qualifica di processi speciali Esecuzione di collaudi tramite CMM, teodoliti, microscopi, interferometri, Faro Arm) Obiettivi: Diventare autonomi nell’integrazione, test e qualifica dei nostri apparati laser spaziali Saper allineare cavità laser, sezioni di amplificazione e di conversione armonica, valutando le performance intermedie e finali di ogni elemento attivo e sezione del sistema laser. Concurrent engineering durante le fasi di progettazione per evitare possibili rischi durante la futura integrazione di prodotti Titolo di studio: Laurea Magistrale in Ingegneria Elettronica e/o Fisica Nice to Have: aver sostenuto esami di ottica e/o ottica quantistica, fotonica, opto-elettronica, fisica dello stato solido e/o aver svolto tesi sperimentale con banchi di misura ottica/laser. Livello di esperienza richiesto: Junior: 1-3 y di esperienza nel ruolo Expert: 3-5 y di esperienza nel ruolo Competenze e conoscenze tecniche: Confidenza con strumenti per integrazione meccanica e ispezione ottiche. Metodicità, capacità di eseguire procedure di test, attitudine alla tracciabilità delle attività svolte. Confidenza nell’utilizzo di strumentazione E/O e per misure Laser (radiometri, profilometri, oscilloscopi, fotodiodi, spettroscopi, etc..). Utilizzo di teodolite, autocollimatore, interferometro, laser di riferimento Capacità di raccolta ed elaborazione avanzata dei dati raccolti (correlazioni, statistiche, trasformazioni di dominio, etc.). Capacità di definire ed elaborare documentazione di test e reportistica tecnica. Esperienze nell’ambiente di sviluppo LABVIEW costituirà titolo preferenziale. Esperienza pregressa di lavoro in Camere Pulite di classe ISO 5 (vecchia Classe 100) rappresenta titolo preferenziale. Competenze comportamentali: Problem solving Orientamento alla qualità Lavoro in team e comunicazione Flessibilità e adattabilità Conoscenze linguistiche: Inglese (liv. min. B2) Competenze informatiche: OS Windows MS Office NI LabViewv Tool di gestione tracciabilità parti e avanzamento cicli di lavoro (SAP, PLM, DB) Tool di visualizzazione di CAD e disegni tecnici costruttivi ottici e meccanici Altro: Disponibilità a trasferte Italia/Estero (brevi 2,3gg) Formazione FOD Formazione ESD Coinvolgimento, valorizzazione delle competenze , cura del benessere e della sicurezza delle persone sono i cardini della nostra cultura aziendale. Ci impegniamo ogni giorno a favorire un ambiente di lavoro inclusivo e stimolante , promuovendo attivamente i principi di inclusione, equità e valorizzazione delle diversità. Cosa offriamo? Il nostro contratto collettivo del lavoro di riferimento è il CCNL per Industria Metalmeccanica Privata e della Installazione di Impianti; Modalità di lavoro: Ibrida; Categoria contrattuale: Impiegato; Tipologia contrattuale: tempo indeterminato Tredicesima mensilità; Premialità legata ai risultati di Business; Buoni Welfare dal valore di 250 euro annui; Mensa aziendale Opportunità di formazione e aggiornamento continuo delle competenze professionali e delle soft skill; Benessere: mettiamo al primo posto il benessere economico, fisico, sociale e psicologico delle nostre persone, offrendo molteplici soluzioni vicine alle loro esigenze. L’azienda si riserva la possibilità di effettuare valutazioni in merito al livello di inquadramento e alla proposta economica, sulla base di criteri oggettivi emersi nel corso del processo di selezione e in coerenza con la seniority del/della candidato/a individuato/a e della posizione, nel rispetto dei principi di equità, trasparenza e pari opportunità previsti dalla normativa vigente. Aspettiamo la tua candidatura: inviaci il tuo CV entro tre settimane dall’apertura dell’annuncio di lavoro. Come funziona il processo di selezione? A seguito della raccolta delle candidature, vengono valutati e identificati i CV maggiormente in linea con i requisiti richiesti. Le/i candidate/i selezionate/i sostengono un colloquio conoscitivo con il team delle Risorse Umane, motivazionale e attitudinale, seguito da un’intervista di approfondimento tecnico con il Business. Al termine del processo, alla persona viene restituito un feedback, sia in caso di esito positivo che negativo. Seniority: Junior Primary Location: IT - Pomezia Contract Type: Permanent Total Base Pay Range: 32.000 - 43.000 Hybrid Working: Hybrid

STMicroelectronics · Bouskoura, MA

Chez STMicroelectronics, nous sommes convaincus que la technologie est un moteur d’innovation et a un impact positif pour les entreprises, les personnes et la société. En tant qu’acteur mondial des semiconducteurs, nos technologies de pointe et nos composants électroniques sont invisibles mais au cœur du monde d’aujourd’hui. Rejoindre ST, c’est intégrer une entreprise internationale riche de plus de 115 nationalités, présente dans 40 pays, et rassemblant plus de 50 000 talents passionnés et engagés, tous unis par la volonté de créer et d’inventer la technologie de demain. Innover demande bien plus que des compétences techniques : cela nécessite des personnes inspirantes, qui savent collaborer avec respect et enthousiasme. Des collaborateurs animés par la passion, prêts à remettre en question le statu quo, à faire avancer l’innovation et à révéler leur plein potentiel. Venez vivre cette aventure avec nous et contribuez à construire un futur plus intelligent et plus durable, en alliant responsabilité et innovation. Notre technologie commence avec vous. A propos de vos missions: Preventive and Corrective Maintenance for Mold, Plasma, PMC and Crop Machines: * Carry out scheduled maintenance to reduce downtime. * Clean, lubricate, and adjust mechanical components. * Detect early signs of wear, misalignment, corrosion, or damage. * Diagnose mechanical, electrical, or pneumatic failures. * Repair or replace damaged components. * Restore equipment to operational condition quickly and safely. * Document faults, actions taken, and replacement parts used. A propos de vous: Technician / Licence diploma ( electronic , mechanic ..) .. ST est fière d’être certifiée parmi les 17 entreprises mondiales « Global Top Employers 2025 » et d’être la première et unique entreprise de semi-conducteurs à recevoir cette distinction. ST a été distinguée dans ce classement grâce à sa démarche d’amélioration continue, se démarquant notamment par son engagement en matière d’éthique et d’intégrité, de sens et de valeurs, d’organisation et de gestion du changement, ainsi que par sa stratégie commerciale et ses performances. En France, ST a également obtenu la labélisation Happy Trainee 2025. Nous cultivons un environnement de travail inclusif et diversifié, où la discrimination n’a pas sa place. Notre ambition est de recruter et de fidéliser des talents reflétant la richesse des sociétés dans lesquelles nous évoluons. Nous nous engageons à l’équité dans le développement des carrières, les opportunités professionnelles et la rémunération. Chez ST, nous encourageons les candidats qui ne remplissent pas forcément tous les critères à postuler, car nous croyons en la richesse des parcours variés et offrons de réelles opportunités d’apprentissage et d’évolution. La diversité, l’équité et l’inclusion sont des valeurs fondamentales qui façonnent notre culture d’entreprise. Pour découvrir toutes nos opportunités, rendez-vous sur st.com/careers.

STMicroelectronics · Bouskoura, MA

Chez STMicroelectronics, nous sommes convaincus que la technologie est un moteur d’innovation et a un impact positif pour les entreprises, les personnes et la société. En tant qu’acteur mondial des semiconducteurs, nos technologies de pointe et nos composants électroniques sont invisibles mais au cœur du monde d’aujourd’hui. Rejoindre ST, c’est intégrer une entreprise internationale riche de plus de 115 nationalités, présente dans 40 pays, et rassemblant plus de 50 000 talents passionnés et engagés, tous unis par la volonté de créer et d’inventer la technologie de demain. Innover demande bien plus que des compétences techniques : cela nécessite des personnes inspirantes, qui savent collaborer avec respect et enthousiasme. Des collaborateurs animés par la passion, prêts à remettre en question le statu quo, à faire avancer l’innovation et à révéler leur plein potentiel. Venez vivre cette aventure avec nous et contribuez à construire un futur plus intelligent et plus durable, en alliant responsabilité et innovation. Notre technologie commence avec vous. A propos de vos missions: Preventive and Corrective Maintenance for Mold, Plasma, PMC and Crop Machines: * Carry out scheduled maintenance to reduce downtime. * Clean, lubricate, and adjust mechanical components. * Detect early signs of wear, misalignment, corrosion, or damage. * Diagnose mechanical, electrical, or pneumatic failures. * Repair or replace damaged components. * Restore equipment to operational condition quickly and safely. * Document faults, actions taken, and replacement parts used. A propos de vous: Technician/ Licence diploma ( electronic, mechanic..) .. ST est fière d’être certifiée parmi les 17 entreprises mondiales « Global Top Employers 2025 » et d’être la première et unique entreprise de semi-conducteurs à recevoir cette distinction. ST a été distinguée dans ce classement grâce à sa démarche d’amélioration continue, se démarquant notamment par son engagement en matière d’éthique et d’intégrité, de sens et de valeurs, d’organisation et de gestion du changement, ainsi que par sa stratégie commerciale et ses performances. En France, ST a également obtenu la labélisation Happy Trainee 2025. Nous cultivons un environnement de travail inclusif et diversifié, où la discrimination n’a pas sa place. Notre ambition est de recruter et de fidéliser des talents reflétant la richesse des sociétés dans lesquelles nous évoluons. Nous nous engageons à l’équité dans le développement des carrières, les opportunités professionnelles et la rémunération. Chez ST, nous encourageons les candidats qui ne remplissent pas forcément tous les critères à postuler, car nous croyons en la richesse des parcours variés et offrons de réelles opportunités d’apprentissage et d’évolution. La diversité, l’équité et l’inclusion sont des valeurs fondamentales qui façonnent notre culture d’entreprise. Pour découvrir toutes nos opportunités, rendez-vous sur st.com/careers.

Leonardo · Basildon, United Kingdom

Job Description: Salary Range: £53,269 - £70,000 Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. Your impact Do you possess skills in the analysis of mechanical structures? If so, this may be a great opportunity to consider: You’ll work at the heart of multidisciplinary project teams, advising and ensuring our products meet demanding environmental and operational requirements. As a Stress Engineer, you will play a key role in the development and production of leading-edge defence products within land, naval, seeker and space domains supporting both new innovations and proven legacy products. You will be responsible for conducting stress analysis, communicating the results and advising on all aspects of structural engineering activities. The role will involve working with multi-discipline project teams and our customers across the UK. What you’ll do as a Principal Stress Engineer: Analyse and assess mechanical designs for strength, durability, performance and safety against regulatory and customer requirements using finite element techniques and classical hand calculations. Support the selection of manufacturing technologies and aerospace materials based on a sound understanding of material physical and mechanical properties and the mechanical fit, form and function of the product. Take ownership of all stress related activities for particular projects through all stages of the product lifecycle for concept to production and beyond. Technical stress authority and signatory for document approval. Develop and maintain common processes and procedures relating to stress engineering activities. Ensure compliance with all relevant legislative, regulatory and contractual requirements (based on recognised military/civil standards). Line of Business lead and point of contact for projects, advising on all aspects of stress and structural dynamics throughout the product lifecycle. Liaise with other UK sites to maintain a consistent approach to stress engineering. Supply support and guidance to more junior members of the Mechanical Team. What we need from you: Essential: Degree qualification in a relevant engineering or science-based course – Mechanical Engineering, Materials Science or Aeronautical Engineering. Proven experience in the use of Finite Element Analysis software tools (preferably Siemens NX/Nastran) and techniques. Working evidence on the application of a wide range of classical hand calculation techniques for static and dynamic loading conditions, fatigue and fracture assessment (Land, Naval or Airborne equipment). Experience of environmental test methods for design verification and working knowledge of design certification for land based and airborne equipment. Ability to communicate with and influence the direction of both internal and external customers. A proven problem solver with a practical, pragmatic approach. Ability to take ownership of work packages, planning and scheduling own workload and the work of others. Desirable: Professional recognition as a Chartered Engineer and full membership of a relevant engineering institution (e.g. IMechE) is preferred. It is advantageous for the candidate to have experience in the design, development and test of electronics packaging and/or aerospace equipment. Experience of manufacturing and joining techniques, engineering material properties. Experience in Thermal Analysis techniques and tool sets (IcePak, Siemens NX). An understanding of the Pressure Equipment Directive 2014/68/EU. The knowledge and experience to progress and become an approved signatory for airworthiness / structural integrity and a named individual on the UK Military Aviation Authority (MAA) Design Approved Organisation Scheme (DAOS). This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn. Working Pattern: Onsite regularly, up to 5 days a week (37 hours standard work week, overtime if approved by project and employee) to delivery security classification and role specific tasks for projects. The company allows hybrid working so working from home is possible when project work allows. Basildon is the primary location option but Southampton or Bristol is possible. Security Clearance This role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) and ITAR may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: https://careers.uk.leonardo.com/gb/en/security-and-vetting Life at Leonardo At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive. Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year. Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution. Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity). Rewarding Performance: All employees at management level and below are eligible for our bonus scheme. Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning. Refer a friend: Receive a financial reward through our referral programme. Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more. Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. Be part of something bigger - apply now! #LI-AP1 Primary Location: GB - Basildon Contract Type: Permanent Hybrid Working: Hybrid

Leonardo · Varese - Cascina Costa, Italy

Job Description: Leonardo is an international industrial group and one of the world's leading companies in the Aerospace, Defence, and Security sectors, delivering multi-domain technological capabilities in the fields of Helicopters, Aircraft, Aerostructures, Electronics, Cyber Security, and Space. With more than 60,000 employees worldwide, the company has a strong industrial presence in Italy, the United Kingdom, Poland, and the United States, and operates in 150 countries through subsidiaries, joint ventures, and equity investments. A key player in major strategic programs at the global level, Leonardo is a technology and industrial partner to governments, defence administrations, institutions, and businesses. Within the Operations area, we are seeking a Rig Design & Instrumentation Manager for our office in Cascina Costa (VA). The Test Rig Design and Instrumentation Manager ensures the technical and operational management of activities related to the development, modification, and construction of test benches used for testing, development, and qualification of helicopter transmissions and mechanical components. Coordinates the internal technical team and ensures the definition of design requirements for mechanical, electrical, hydraulic, and automation systems, overseeing detailed design, manufacturing, and commissioning activities carried out by external suppliers. Ensures technical oversight of suppliers and contractors, verifying compliance with functional, safety, quality, cost, and schedule requirements. Provides technical support for installation, testing, maintenance, and continuous improvement of test benches, collaborating with relevant company functions. MAIN RESPONSIBILITIES Planning and coordination of design activities Ensure technical outputs related to the development and construction of test benches within their area of responsibility; Define technical and functional requirements for new test benches; Promote, where possible, technological improvements of test benches; Coordinate team activities by assigning priorities and monitoring project progress; Plan and supervise detailed design activities entrusted to external suppliers, ensuring coordination with internal company functions; Ensure compliance with technical, quality, regulatory, and safety requirements throughout all phases of implementation; Ensure proper issuance and management of project technical documentation; Supervise contractor activities, verifying the technical compliance of developed solutions with defined requirements; Ensure monitoring of construction and commissioning activities, intervening in the resolution of technical issues and verifying compliance with contractual requirements, timelines, and expected quality standards; Ensure that contractor activities comply with required safety, quality, and performance standards. PROFESSIONAL REQUIREMENTS Degree in Mechanical Engineering or equivalent, with at least 5 years of experience in the design and construction of test benches and/or complex industrial systems; Experience in the technical coordination of internal resources and external suppliers; Knowledge of mechanical, electrical, hydraulic, and industrial automation systems; Knowledge of mechanical design for machines and/or industrial systems; Ability to technically manage suppliers and supervise commissioning activities; Knowledge of machinery safety requirements and applicable technical regulations; Strong planning, technical problem-solving, and multidisciplinary coordination skills; Ability to manage priorities operationally and achieve project objectives. SOFT SKILLS: Ability to work in team Problem solving oriented Initiative and motivation Ability to work independently Ability to assign and manage priorities Excellent communications, listening and interpersonal skills Coordinating a team Seniority Expert/Senior: >5 years of experience Language skills: Excellent command of English, at B2/C1 level WHAT WE OFFER Engagement, recognition of skills, and a strong focus on people's well-being and safety are the cornerstones of our corporate culture. Every day, we are committed to fostering an inclusive and stimulating work environment by actively promoting the principles of inclusion, equity, and diversity enhancement. Our reference collective labor agreement is the National Collective Labor Agreement (CCNL) for the Private Metalworking Industry and Plant Installation Sector. Working arrangement: On site Employment category: White-collar employee Contract type: Permanent contract 13th-month salary Performance bonus linked to business results Variable incentive defined on the basis of company procedures Welfare vouchers worth €250 per year Ongoing training and professional development opportunities, including both technical and soft skills Well-being: We place the economic, physical, social, and psychological well-being of our people first, offering a variety of solutions tailored to their needs. The company reserves the right to assess the appropriate employment level and compensation package based on objective criteria emerging during the selection process and in line with the seniority of the selected candidate and the position itself, in accordance with the principles of fairness, transparency, and equal opportunities established by applicable legislation. THE SELECTION PROCESS We look forward to receiving your application: please submit your CV within three weeks of the job posting date. How does the selection process work? Following the application collection phase, the CVs that best match the required qualifications will be evaluated and shortlisted. Selected candidates will take part in an introductory interview with the Human Resources team, focusing on motivation and aptitude, followed by an in-depth technical interview with the relevant Business function. At the end of the process, all candidates will receive feedback, regardless of whether the outcome is positive or negative Seniority: Expert Primary Location: IT - Varese - Cascina Costa Contract Type: Permanent Total Base Pay Range: 48.000,00 - 57.509,34 euro Hybrid Working: Onsite

Leonardo · Edinburgh, United Kingdom

Job Description: Salary Range: £59,400 - £75,000 Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. We are looking for a Lead Supportability Engineer with strong industry experience not necessarily within the domain of Supportability, but those with backgrounds in Electronics/Hardware or Systems would also be suitable. The Supportability department has a unique position within our business as it is involved in the full lifecycle of a programme, from Bid, Development, Production then Customer Support and eventually disposal. We draw engineers from many different disciplines such as Electrical and Electronic, Mechanical, and System Engineering to enhance the Supportability department. We expect our people to create strong working relationships with cross-department colleagues in Systems, Electronics, Mechanical, Software, Test Equipment, Quality and Industrial to identify problems on complex systems before they reach Production or the Customer. As a department, we have a strong focus on continuous improvement of our procedures and processes but also of our department itself and want anyone who joins to be part of that journey. This might include using your engineering talent to grow and develop the Supportability community and skill base through the mentoring, coaching and development of more junior members of the team or contributing to best practices to help drive out the cost and reputational consequence of failure. We can also help you develop your skills and offer great opportunities to develop, grow and progress in your career! Your impact As a Lead Engineer, you will be leading a team of Supportability Engineers who deliver a wide range of Supportability Engineering work packages. You will work closely with Project Managers, Operations and Project Engineering Managers from other functions within the Integrated Project Teams to advise on Supportability requirements, provide analysis and offer guidance. What you’ll bring You will support and develop your team to ensure the broad range of Supportability analysis and deliverables can be completed, including: Reliability Analysis: Working with other disciplines, your team will develop component to system level reliability models, including the use of Reliability Block Diagram Methodology on electronic, power, RF, digital and mechanical systems to provide guidance to the design engineers. Reliability Testing and Simulation (e.g. FEA, RGT, HALT, ESS): The Supportability team will create models to discover areas of concern and develop Reliability Growth plans and procedures to identify failure modes and propose Corrective action. Maintainability Analysis: Your team will carry out modular to system level analysis that addresses Human Factors and Maintenance Task Analysis to identify Reliability Centred Maintenance and Scheduled Maintenance tasks , ensuring that the equipment meets it operational capability Testability Analysis: Your team will complete a FMECA analysis, working closely with Hardware engineers to establish the effectivity of fault detection and isolation of the equipment BIT and feed back omissions and improvements into the design process Product Safety: As part of a broader safety team, including Design Integrity and Systems Engineering, your team will carry out analysis of the design, its assembly, test and operation to complete an Intrinsic Product Safety hazard and Environment Impact Analysis, providing input to the Hazard Log, Safety Case and Fault Tree Analysis. Production Support: Your team will be involved in analysis of production and in-service failure data (FRACAS), to identify and prioritise pattern faults. SE will work within a multi-discipline IPT team to identify Root Cause and Corrective action. Support Strategy: You will help to develop a product’s In-Service Support strategy, using through-life cost modelling and many aspects of the above analysis. Alongside supporting the activities above, you will also: Ensure milestones are completed to schedule and budget while ensuring technical quality Provide expert input into Life Cycle Management reviews Work alongside the IPT to reduce cost and risk across the lifecycle and support any continuous improvement activities.Work with Supportability HoD to seek improvements to our methods and processes and topromote and implement improved ways of working within the Supportability department. Schedule, manage and Chair Sector Project Cost Review Boards (PCRBs) Skills, Qualifications & Knowledge Required Degree in a relevant engineering or science discipline. Worked in industry, defence or have other relevant experience. Strong experience of leading and developing teams Commercial and business awareness. Experience in engineering management and delivery of project work packages Ability to manage complex situations with sound judgement and the ability to balance conflicting challenges We are particularly interested in receiving your application if you have experience in any of the following areas: Experience of working with, and supporting products throughout their whole lifecycle Working in multi-disciplinary teams to influence design by implementation of DfX, specifically those associated with Supportability such as Design for Supportability, Reliability, Maintenance, Testability and Safety Experience of implementing and undertaking Failure Modes Effects & Criticality Analysis (FMEA/FMECA) Knowledge of the many UK and International Standards applicable to Safety and RMT Availability analysis and modelling A working knowledge of the following tools and packages would be beneficial: MS Office packages; PTC Windchill;; Matlab/Simulink; Power BI; JIRA and Python This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn. Security Clearance This role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: https://careers.uk.leonardo.com/gb/en/security-and-vetting Why join us At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive. Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year. Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution. Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity). Rewarding Performance : All employees at management level and below are eligible for our bonus scheme. Never Stop Learning : Free access to 4,000+ online courses via Coursera and LinkedIn Learning. Refer a friend: Receive a financial reward through our referral programme. Tailored Perks : Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more. Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. Be part of something bigger - apply now! #LI-AP1 Primary Location: GB - Edinburgh Contract Type: Permanent Hybrid Working: Hybrid

STMicroelectronics · SG

OUR STORY At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and chips form the hidden foundation of the world we live in today. When you join ST, you will be part of a global business with more than 115 nationalities, present in 40 countries, and comprising over 50,000 diverse and dedicated creators and makers of technology around the world. Developing technologies takes more than talent: it takes amazing people who understand collaboration and respect. People with passion and the desire to disrupt the status quo, drive innovation, and unlock their own potential. Embark on a journey with us, where you can innovate for a future that we want to make smarter and greener, in a responsible and sustainable way. Our technology starts with you. YOUR ROLE You take part in creating the best new hire experience in the project to completely renew our talent acquisition and onboarding process. You also help us with finding the best vendors for recruitment, and managing the a to z collaboration with them. * Support and coordinate the shift maintenance team for front-end module equipment, ensuring effective execution of daily tasks. * Perform advanced troubleshooting and root cause analysis on mechanical, electrical, electronics and control systems of process module tools. * Assist in planning and execution of preventive and predictive maintenance for assigned equipment. * Provide technical guidance, on-the-job training and mentorship to maintenance technicians. * Work closely with vendors, process engineers and internal support teams to resolve escalated equipment issues and improve tool performance. * Analyze equipment and maintenance data (downtime, MTBF, MTTR, recurring faults) and prepare accurate shift reports. * Support and participate in continuous improvement projects to enhance equipment reliability, availability and throughput. * Ensure adherence to cleanroom protocols, EHS requirements and all safety procedures during maintenance activities. YOUR SKILLS & EXPERIENCES * Diploma in Mechanical, Electrical, Electronics, Mechatronics or related engineering discipline. * Strong troubleshooting skills in semiconductor manufacturing equipment. * Hands-on experience with front-end process equipment and control systems is an advantage. * Demonstrated experience in shift-based support, team coordination or leadership roles. * Good analytical, documentation and communication skills (verbal and written). * Able and willing to work rotating 12-hour shifts in a 24/7 cleanroom manufacturing environment. ST is proud to be one of the 17 companies certified as a 2025 Global Top Employer and the first and only semiconductor company to achieve this distinction. ST was recognized in this ranking thanks to its continuous improvement approach and stands out particularly in the areas of ethics & integrity, purpose & values, organization & change, business strategy, and performance. At ST, we endeavor to foster a diverse and inclusive workplace, and we do not tolerate discrimination. We aim to recruit and retain a diverse workforce that reflects the societies around us. We strive for equity in career development, career opportunities, and equal remuneration. We encourage candidates who may not meet every single requirement to apply, as we appreciate diverse perspectives and provide opportunities for growth and learning. Diversity, equity, and inclusion (DEI) is woven into our company culture. To discover more, visit st.com/careers.

STMicroelectronics · SG

OUR STORY At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and chips form the hidden foundation of the world we live in today. When you join ST, you will be part of a global business with more than 115 nationalities, present in 40 countries, and comprising over 50,000 diverse and dedicated creators and makers of technology around the world. Developing technologies takes more than talent: it takes amazing people who understand collaboration and respect. People with passion and the desire to disrupt the status quo, drive innovation, and unlock their own potential. Embark on a journey with us, where you can innovate for a future that we want to make smarter and greener, in a responsible and sustainable way. Our technology starts with you. YOUR ROLE As a Senior/Principal Equipment Engineer, you will be involved in: * Maintaining Equipment Reliability – Assist in carrying out equipment maintenance to ensure performance consistency and reduce equipment downtime. * Equipment Efficiency Improvement – Assist to analyze equipment failure pareto and carry out effective planning for corrective and preventive measures to maintain high equipment reliability and efficiency improvement. * Equipment Capacity Support – Assist to provide technical support on equipment capacity enhancement. Perform analysis, organize, and perform retrofits for equipment installation and relocation. * Equipment Cost Reduction-Plan and implement equipment cost reduction projects. * Update MDMS to document best practices. YOUR SKILLS & EXPERIENCES * Bachelor Degree in Mechanical, Mechatronics, Electrical, Electronics Engineering. * Minimum >5 years' direct experience working in CVD equipment. * In-depth knowledge in Applied Materials Producer SACVD, Centura HDP, DxZ would be advantageous. * General knowledge of Risk Assessment, 8D, Ishikawa, Root Cause tools is an added advantage. * Proficient in Microsoft Office applications. * Positive learning attitude with strong sense of responsibility. * Fast learner, independent and able to work in a cross functional team. * Attention to details and self-driven. * Works under minimum supervision. * Able to work independently and cope with pressure. ST is proud to be one of the 17 companies certified as a 2025 Global Top Employer and the first and only semiconductor company to achieve this distinction. ST was recognized in this ranking thanks to its continuous improvement approach and stands out particularly in the areas of ethics & integrity, purpose & values, organization & change, business strategy, and performance. At ST, we endeavor to foster a diverse and inclusive workplace, and we do not tolerate discrimination. We aim to recruit and retain a diverse workforce that reflects the societies around us. We strive for equity in career development, career opportunities, and equal remuneration. We encourage candidates who may not meet every single requirement to apply, as we appreciate diverse perspectives and provide opportunities for growth and learning. Diversity, equity, and inclusion (DEI) is woven into our company culture. To discover more, visit st.com/careers.

STMicroelectronics · SG

OUR STORY At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and chips form the hidden foundation of the world we live in today. When you join ST, you will be part of a global business with more than 115 nationalities, present in 40 countries, and comprising over 50,000 diverse and dedicated creators and makers of technology around the world. Developing technologies takes more than talent: it takes amazing people who understand collaboration and respect. People with passion and the desire to disrupt the status quo, drive innovation, and unlock their own potential. Embark on a journey with us, where you can innovate for a future that we want to make smarter and greener, in a responsible and sustainable way. Our technology starts with you. YOUR ROLE Support and coordinate the shift maintenance team for front-end module equipment, ensuring effective execution of daily tasks. Perform advanced troubleshooting and root cause analysis on mechanical, electrical, electronics and control systems of process module tools. Assist in planning and execution of preventive and predictive maintenance for assigned equipment. Provide technical guidance, on-the-job training and mentorship to maintenance technicians. Work closely with vendors, process engineers and internal support teams to resolve escalated equipment issues and improve tool performance. Analyze equipment and maintenance data (downtime, MTBF, MTTR, recurring faults) and prepare accurate shift reports. Support and participate in continuous improvement projects to enhance equipment reliability, availability and throughput. Ensure adherence to cleanroom protocols, EHS requirements and all safety procedures during maintenance activities. YOUR SKILLS & EXPERIENCES Diploma in Mechanical, Electrical, Electronics, Mechatronics or related engineering discipline. Strong troubleshooting skills in semiconductor manufacturing equipment. Hands-on experience with front-end process equipment and control systems is an advantage. Demonstrated experience in shift-based support, team coordination or leadership roles. Good analytical, documentation and communication skills (verbal and written). Able and willing to work rotating 12-hour shifts in a 24/7 cleanroom manufacturing environment. ST is proud to be one of the 17 companies certified as a 2025 Global Top Employer and the first and only semiconductor company to achieve this distinction. ST was recognized in this ranking thanks to its continuous improvement approach and stands out particularly in the areas of ethics & integrity, purpose & values, organization & change, business strategy, and performance. At ST, we endeavor to foster a diverse and inclusive workplace, and we do not tolerate discrimination. We aim to recruit and retain a diverse workforce that reflects the societies around us. We strive for equity in career development, career opportunities, and equal remuneration. We encourage candidates who may not meet every single requirement to apply, as we appreciate diverse perspectives and provide opportunities for growth and learning. Diversity, equity, and inclusion (DEI) is woven into our company culture. To discover more, visit st.com/careers.

STMicroelectronics · SG

OUR STORY At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and chips form the hidden foundation of the world we live in today. When you join ST, you will be part of a global business with more than 115 nationalities, present in 40 countries, and comprising over 50,000 diverse and dedicated creators and makers of technology around the world. Developing technologies takes more than talent: it takes amazing people who understand collaboration and respect. People with passion and the desire to disrupt the status quo, drive innovation, and unlock their own potential. Embark on a journey with us, where you can innovate for a future that we want to make smarter and greener, in a responsible and sustainable way. Our technology starts with you. YOUR ROLE To ensure the facilities systems re functioning well, with good efficiency, with minimum interruption to the production operation. * Responsible for the day-to-day operation of all mechanical, ACMV, electrical and fire system. * Monitoring of parameters and attend to any system alarm. * Perform routine operation switch over activities. * Monitor and collect onsite parameters & system performance * Feedback and perform first line troubleshooting to restore system to operation state else escalate to next level. * Perform preventive maintenance for mechanical systems include pumps, MAH/AHU systems etc. * Perform and maintain 5s and housekeeping at workplace. * Provide support to system engineer for various activities involving robustness improvement and expansion within facilities plant. * Participate in Emergency Response Team as needed. YOUR SKILLS & EXPERIENCES * Minimum NTC2 / NITEC in Mechanical / Electrical engineering. * 2 to 5 years relevant experience in mechanical and electrical maintenance. * Must have hands-on experience in the last 3 years. * Able to perform 12-hours rotating shift work. ST is proud to be one of the 17 companies certified as a 2025 Global Top Employer and the first and only semiconductor company to achieve this distinction. ST was recognized in this ranking thanks to its continuous improvement approach and stands out particularly in the areas of ethics & integrity, purpose & values, organization & change, business strategy, and performance. At ST, we endeavor to foster a diverse and inclusive workplace, and we do not tolerate discrimination. We aim to recruit and retain a diverse workforce that reflects the societies around us. We strive for equity in career development, career opportunities, and equal remuneration. We encourage candidates who may not meet every single requirement to apply, as we appreciate diverse perspectives and provide opportunities for growth and learning. Diversity, equity, and inclusion (DEI) is woven into our company culture. To discover more, visit st.com/careers.

STMicroelectronics · Muar, MY

OUR STORY At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and chips form the hidden foundation of the world we live in today. When you join ST, you will be part of a global business with more than 115 nationalities, present in 40 countries, and comprising over 50,000 diverse and dedicated creators and makers of technology around the world. Developing technologies takes more than talent: it takes amazing people who understand collaboration and respect. People with passion and the desire to disrupt the status quo, drive innovation, and unlock their own potential. Embark on a journey with us, where you can innovate for a future that we want to make smarter and greener, in a responsible and sustainable way. Our technology starts with you. YOUR ROLE You are part of assembly operation, support manufacturing with maintenance related activities with excellent quality, cost, and delivery. You play a critical role in ensuring smooth, efficient, and reliable manufacturing processes by maintaining and optimizing assembly line equipment. This role demands a mix of strong technical expertise, leadership, and proactive maintenance management skills to minimize downtime and support production goals. Below are the main task: * Lead and manage maintenance activities for assembly line equipment and machinery in the Back-End Manufacturing (BEM) assembly process. * Ensure high equipment availability, reliability, and performance to meet production targets. * Develop and implement preventive and predictive maintenance programs. * Troubleshoot complex mechanical, electrical, and automation issues on assembly lines. * Coordinate with production, quality, and engineering teams to minimize downtime and improve process efficiency. * Manage maintenance team activities, provide technical guidance, and ensure safety compliance. * Analyze equipment failure data and implement continuous improvement initiatives. * Plan and oversee installation, commissioning, and validation of new equipment or upgrades. * Maintain accurate maintenance documentation, reports, and compliance with company standards. * Lead cost saving projects to achieve annual savings. YOUR SKILLS & EXPERIENCES * Bachelor’s degree in Mechanical, Electrical, Mechatronics Engineering or related field. * Minimum 5-8 years in maintenance engineering, preferably in semiconductor or electronics assembly operations. Experience in BACKEND MANUFACTURING is highly preferred. * \- Strong knowledge of mechanical, electrical, pneumatic, and automation systems used in assembly lines. \- Proficiency in troubleshooting and repairing complex equipment. \- Experience with PLC programming and control systems. \- Knowledge of robotics and vision inspection systems is a plus. \- Familiarity with CMMS (Computerized Maintenance Management Systems). * \- Preventive, predictive, and corrective maintenance planning and execution. \- Root cause analysis and failure mode effect analysis (FMEA). \- Equipment calibration and validation. \- Spare parts management and inventory control. * \- Strong leadership and team management skills. \- Excellent problem-solving and analytical abilities. \- Good communication and coordination skills. \- Ability to work under pressure and manage multiple tasks. * \- Knowledge of safety standards and practices in manufacturing environments. \- Ensure compliance with EHS (Environment, Health, Safety) regulations. ST is proud to be one of the 17 companies certified as a 2025 Global Top Employer and the first and only semiconductor company to achieve this distinction. ST was recognized in this ranking thanks to its continuous improvement approach and stands out particularly in the areas of ethics & integrity, purpose & values, organization & change, business strategy, and performance. At ST, we endeavor to foster a diverse and inclusive workplace, and we do not tolerate discrimination. We aim to recruit and retain a diverse workforce that reflects the societies around us. We strive for equity in career development, career opportunities, and equal remuneration. We encourage candidates who may not meet every single requirement to apply, as we appreciate diverse perspectives and provide opportunities for growth and learning. Diversity, equity, and inclusion (DEI) is woven into our company culture. To discover more, visit st.com/careers.